Procedures of Shanghai Municipality on the Administration of Standard Metrologic

(Promulgated by Shanghai Municipal People s Government on June 6, 1997)

Article 1 (Purpose and Basis)

The present Procedures are formulated in accordance with the Provisions of the Metrologies Law of the People s Republic of china and the Implementation Rules thereof, and in light of the actual circumstances in this municipality, in order to strengthen the administration of standard metrogical apparatuses for public use in society and to guarantee the accuracy and reliability of metrological values.



Article 2 (Definition)

The standard metrological apparatuses for public use in society referred to in the present Procedures means the standard metrological apparatuses, the establishment of which is organized by the administrative departments of metrologies, and which is used as a basis for unifying the metrological value within the administrative region of this municipality, and has the function of authenticating the weighing and measuring in the society.



Article 3 (Scope of Application)

The present Procedures apply to the establishment, maintenance, use, and abolishment of standard metrological apparatuses for public in society within the limits of this Municipality.



Article 4 (Competent Authority)

The Shanghai Municipal Technology Supervision Bureau (hereinafter referred to as the Municipal Technology supervision Bureau) is the department in charge of the administration of metrologies, It is responsible for the administration and supervision of the standard metrological apparatuses for public use in society in this Municipality.



The administrative departments of metrologies at district or county level of this Municipality are responsible for the administration and supervision of the standard metrological apparatuses for public use in society in their respective administrative region according to their division of duties under the guidance of the municipal Technology Supervision Bureau.



Article 5 (Formulation of Plan)

The Municipal Technology supervision Bureau shall make a unified plan for the establishment of standard metrological apparatuses for public use in society according to the needs of economic construction, social development and technology progress in this Municipality. The plan shall be implemented after being approved by the Municipal People s Government.



Article 6 (Establishment of Standard Metrological Apparatuses for Public Use in Society).

The establishment of the standard metrological apparatuses shall comply with the plan of this Municipality for establishing standard metrological apparatuses for public use in society.

All standard metrological apparatuses for public use in society of a basic nature and for general purpose use which serve different trades and industries shall be set up in the legal organs for metrological examination and determination. Special standard metrological apparatuses for public use in society that are of high speciality nature and are only needed by specific trade and industry or that require special working condition shall, with the approval of the administrative department of metrologies that has organized and established such standard metrological apparatuses of public use in society, be set up in other metrologies examining and determining or metrologies technical organs which are qualified as independent legal persons.



Article 7 (Check of Stand and Metrological Apparatuses for Public Use in Society).

A standard metrological apparatus for public use in society shall only be allowed to provide metrological testing and calibration service after being check and found to be qualified.

Standard metrological apparatuses for public use in society, which are organized and established by the administrative department of metrologies at district or country level, and which are of the highest class in the administrative region, shall be checked under the direction of the Municipal Technology Supervision Bureau. Standard metrological apparatuses for public use in society, which are organized and established by the Municipal Technology Supervision Bureau, and which are of the highest class in its administrative region, shall be checked under the standard metrological apparatuses for public use in society of other classes shall be check under the direction of the administrative departments of metrologies that have organized and established the said standard metrological apparatuses for public use in society.



Article 8 (Mandatory Examination and determination of Standard Metrological Apparatuses for Public Use in Society)

Mandatory examination and determination shall be carried out regularly on the standard metrological apparatuses for public use in society.



The mandatory examination and determination of standard metrological apparatuses for public use in society shall be done by the legal organs for the examination and determination of metrologies appointed by the administrative department of metrologies in charge of the original checking, or done by other metrologies examination and determination or metrologies technical organs authorized by the administrative department of metrologies in charge of the original checking.



Article 9 (Use of The Standard Metrological Apparatuses for Public Use in Society).

When using the standard metrological apparatuses for public use in society to provide metrological testing or calibration service, the organs for the examination and determination of the metrologies or the metrologies technical organs must have met the requirements specified by the table of the National System of Metrological Examination and Determination and the requirements related to metrological technical norms, and issue corresponding certificates of examination and determination of calibration reports.



Article 10 (Suspension of the Use of Standard Metrological Apparatuses for Public Use in Society).

The organs for the examination and determination of the metrologies or the metrologies technical organs shall regularly check the technical conditions of the standard metrological apparatuses for publics use in society to guarantec that they function formally.



The organs for the examination and determination of the metrologies or the metrologies technical organs shall not suspend the examination and determination of the metrologies and calibration service of their own accord. If it is necessary for them to suspend the service for some reason, the following procedures shall be followed:



1. In case the period of suspension is not more than 30 days, a report shall be submitted to the administrative department of metrologies that has organized and established the standard metrological apparatuses for public use in society for the record;



2. In case the period of suspension is more than 30 days, a report shall be submitted to the administrative department of metrologies that has organized and established the standard metrological apparatuses for public use in society for approval.



Article 11 (Disassembly and Refit of Standard Metrological Apparatuses for Public Use in Society).

In case the standard metrological apparatuses for public use in society need to be disassembled or refitted because of damage of because of the revision of the originally executed table of the Notional System of Metrological Examination and Determination and metrological technical norms, a report shall be submitted or approval to the administrative department of metrologies that has organized and established the standard metrological apparatuses for public use in society.



Article 12 (Situations Leading to the Abolishment of A Standard Metrological Apparatus for Public Use in Society).



A standard metrological apparatus for public use in society shall be abolished if one of the following situations appears during the use of the standard metrological apparatus for public use in society:

1. When a standard metrological apparatus for public use in society is replaced by another one; or,



2. When the organ that has established the standard metrological apparatuses for public use in society is ordered to close down.



Article 13 (Application for Abolishing the Standard Metrological Apparatuses for Public Use in Society)

When a standard metrological apparatus for public use in society is to be abolished, an application shall be submitted to the Municipal Technology supervision Bureau:



1. To abolish various standard metrological apparatuses for public use in society that are organized and established by the administrative department of metrologies at district or county level, the application shall be made by the same administrative department of metrologies;



2. To abolish various standard metrological apparatuses for public us in society that are organized and established by the Municipal Technology Supervision Bureau, the application shall be made by the organ that installs the apparatus to be abolished.



The Municipal Technology Supervision Bureau shall make a re-verification decision within 10 days after the receipt of the application. The re-verification decision approving the abolishment shall be notified to the applicant department or organ, and be announced publicly.



No department or organ shall be allowed to use the standard metrological apparatuses that have already been abolished.



Article 14 (Disposal of the Abolished Standard Metrological Apparatus for Public use in Society)

The standard metrological apparatuses for public use in society that have been abolished shall be sent to the Municipal Technology Supervision Bureau for unified disposal.



Article 15 (System and Operating Norms of Storage, Maintenance, and Use)

Organs for examination and determination of metrologies or metrologies technical organs that have installed standard metrological apparatuses for public use in society shall have a perfect system and operating norms for the preservation, maintenance and use of the standard metrological apparatuses for public use in society.



The environmental temperature and humidity, and the degree of being dustproof, shockproof, corrosion resistant and jamproof at the place where the standard metrological apparatuses for public use in society are kept shall meet the needs of the normal operation of the apparatuses.



Article 16 (Personnel Taking Care of the Stand Metrological Apparatuses for Public Use in Society)

The standard metrological apparatuses for public use in society shall be kept, maintained and used under the charge of specially assigned personnel.



All persons who are in charge of the keeping, maintaining and using of the standard metrological apparatuses shall be trained, be examined and verified by the administrative department of metrology and found to be qualified, and be awarded a certificate of examination and determination of metrologies.



Article 17 (Payment of Damages)

Any person who sues the standard metrological apparatuses for public use in society without adhering to the table of the National System of Metrological Examination and Determination and relevant Metrological technical norms and thus causing damages to a client or other interested party, shall be liable for the damages according to law.



Article 18 (Department Responsible for Interpretation in Application)

The Municipal Technology Supervision Bureau shall be responsible for the interpretation of the present Procedures in their specific application.



Article 19 (Effective Date)

The present Procedures shall become effective on July 1, 1997.